2019 Guangdong International Robotics and Intelligent Equipment Expo 21st DMP Dongguan International Mould and Metalworking Exhibition 21st DMP Dongguan International Plastic and Packaging Exhibition DMP Hardware Exhibition Guangdong International Robot Total Solution Expo

The TPE encapsulation material has a dry feel and a fine surface; easy to color and no smell; good elasticity; over the European standard; Subo can develop products corresponding to the requirements based on the samples provided by the company. TPE series products are thermoplastic elastomers based on SEBS/PP and SEBS/PE. It is a block copolymer. The hard segment acts as a physical cross-linking point, and the soft segment acts as a traditional rubber elasticity.

·Flexible and comfortable to fit the skin better (30-45A hardness) ·Odorless and environmentally friendly, long-term skin contact without sensitization (in line with ROHS, REACH, NP, PAHS, ISO10993 standards) ·Rapid molding and high production efficiency

Polypropylene PP meltblown special material is based on polypropylene PP, using peroxide degradation and controllable rheology to improve the fluidity and molecular weight distribution of the resin. The melt mass flow rate is 1500g/10min. The product is suitable for the melt-blown non-woven fabric forming process and is the main raw material for the production of polypropylene melt-blown non-woven products. The most important thing in the mask is the melt blown layer, which is mainly to isolate droplets, particles, acid mist, microorganisms, etc.

PP electret masterbatch, electret refers to a dielectric material that has the function of storing charges for a long time and releasing negative ions. The stored charge can be a unipolar real charge (space charge) injected from the outside, or it can be a double in a polar dielectric. Dipole charges formed by the orderly orientation of poles, or both types of charges. Increase the electrostatic adsorption and negative ion sterilization capabilities of the mask to effectively block droplets, dust, viruses, etc. below micrometers.

Features of special materials for TPE protective masks: flexible and comfortable, more fit to the skin (30-45A hardness); odorless and environmentally friendly; long-term skin contact without sensitization

Polypropylene PP meltblown special material is based on polypropylene PP, using peroxide degradation and controllable rheology to improve the fluidity and molecular weight distribution of the resin. The melt mass flow rate is 1500g/10min.

PP electret masterbatch, electret refers to a dielectric material that has the function of storing charges for a long time and releasing negative ions. The stored charge can be a unipolar real charge injected from the outside (space charge)