Product description EN35A-HM-6 is a kind of thermoplastic elastomer material based on SEBS as main material.Also it has rapid molding and easy coloring properties. Key characteristic 1.Exquisite， soft and dry touch，good scratch resistance. 2.Excellent ageing resistance and corrosion resistance 3.It can be spliced with PP and PE Function Main application 1 Automotive products 3 Handlebar 2 Sports equipment 4 Toy products Processing method Injection molding  Environmental certification ROHS REACH EN71-3 PAHS ASTM-F963 Phthalate Color Natural Smell A little resin smell Appearance Cylindrical particle，about 3mm×1.5mm Storage period Ventilated dry at normal temperature，about 24 months Packaging method 25kg/bag Physical properties Result Unit Method Molding condition Specific gravity 1.12±0.02 g/cm3 ASTM D792 Drying temp   70℃ Hardness 38±5 shoreA ASTM D2240 Drying time   2Hours Tensile strength >2 Mpa ASTM D412 Nozzle temp   190℃ Elongation at break >350 % ASTM D412 Screw 1 temp 180℃ Tearing strength >8 Kn/m ASTM D624 Screw 2 temp 170℃ Melt index >28 g/10min ASTM D1238 Screw 3 temp 160℃ Matters need attention Purge compound Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean Coloring     Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion Recycling Consistent regrind usage of up to 20% i