tpe production plant RN90A3-01

 
产品说明Product description ·RN90A3-01是一款经济型材料。 ·RN90A3-01 is an economic material。 关键特性Key characteristic 1.表面光亮Bright surface. 2..可喷油,丝印,上胶水,油墨Oil injection,silkscreen,can be applied with glue and ink.   功能Function 产品应用 Main application 玩具公仔Toy dolls   鞋材 Shoe material   加工方法Processing method 注塑成型Injection molding 环保认证 Environmental certification ROHS REACH EN71-3 PAHS ASTM-F963 Phthalate 颜色Color 乳白色Milky-white 气味Smell 少许树脂味A little resin smell 外型Appearance 圆球形小颗粒Cylindrical particle,about 3mm×1.5mm 储藏期Storage period 常温下通风干燥,12个月Ventilated dry at normal temperature,about 12 months 包装方式Packaging method 25公斤/袋 25kg/bag 物理性能Physical properties 结果Result 单位Unit 方法Method 成型条件Molding condition 比重Specific gravity 1.07±0.02 g/cm3 ASTM D792 干燥温度Drying temp      硬度Hardness 88±5 shoreA ASTM D2240 干燥时间Drying time       拉伸强度Tensile strength <10 Mpa ASTM D412 射嘴温度Nozzle temp     190℃ 断裂延伸Elongation at break <200 % ASTM D412 螺筒一段温度Screw 1 temp 180℃ 撕裂强度Tearing strength >40 Kn/m ASTM D624 螺筒二段温度Screw 2 temp 170℃ 熔融指数Melt index >3 g/10min ASTM D1238 螺筒三段温度Screw 3 temp 160℃ 注意事项Matters need attention 清洗料管 Purge compound 需使用PP或 PE清洗干净机台螺杆,且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean. 着色 Coloring     请选择以PE或EVA为基材之色母,切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压,才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed are backpressure are needed for better colorant dispersion. 回收 Recycling 二次料(水口料)回收比率建议最多20%. Consistent regrind usage of up to 20% is permissible.    
 
Product description

产品说明Product description

·RN90A3-01是一款经济型材料

·RN90A3-01 is an economic material

关键特性Key characteristic

1.表面光亮Bright surface.

2..可喷油,丝印,上胶水,油墨Oil injectionsilkscreencan be applied with glue and ink.

 

功能Function

产品应用

Main application

玩具公仔Toy dolls

 

鞋材 Shoe material

 

加工方法Processing method

注塑成型Injection molding

环保认证

Environmental certification

ROHS

REACH

EN71-3

PAHS

ASTM-F963

Phthalate

颜色Color

乳白色Milky-white

气味Smell

少许树脂味A little resin smell

外型Appearance

圆球形小颗粒Cylindrical particleabout 3mm×1.5mm

储藏期Storage period

常温下通风干燥,12个月Ventilated dry at normal temperatureabout 12 months

包装方式Packaging method

25公斤/25kg/bag

物理性能Physical properties

结果Result

单位Unit

方法Method

成型条件Molding condition

比重Specific gravity

1.07±0.02

g/cm3

ASTM D792

干燥温度Drying temp     

硬度Hardness

88±5

shoreA

ASTM D2240

干燥时间Drying time      

拉伸强度Tensile strength

<10

Mpa

ASTM D412

射嘴温度Nozzle temp     190

断裂延伸Elongation at break

<200

%

ASTM D412

螺筒一段温度Screw 1 temp 180

撕裂强度Tearing strength

>40

Kn/m

ASTM D624

螺筒二段温度Screw 2 temp 170

熔融指数Melt index

>3

g/10min

ASTM D1238

螺筒三段温度Screw 3 temp 160

注意事项Matters need attention

清洗料管

Purge compound

需使用PPPE清洗干净机台螺杆,且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.

着色

Coloring

 

 

请选择以PEEVA为基材之色母,切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压,才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed are backpressure are needed for better colorant dispersion.

回收

Recycling

二次料(水口料)回收比率建议最多20%.

Consistent regrind usage of up to 20% is permissible.

 

 

There is currently no content to display
Please add data record on website background.
塑伯TPE
塑伯橡塑胶
智能穿戴硬件联盟

Copyright © 2021          Guangdong  SPP New Material Co.,LTD

All Rights Reserved       粤ICP备2020127300号

 

TEL:+86-0752-6768128    FAX:+86-0752-6768088     MAIL:sales@tpe-sp.com   WEB:Een.tpe-sp.com

ADD:Huangxi Industrial Park, Shiwan Town, Boluo County, Huizhou City, Guangdong Province,China